Thermoplastic stationary tanks – Safe Work Instrument 2017

This is the Health and Safety at Work (Hazardous Substances—Thermoplastic Stationary Tanks) Safe Work Instrument 2017.

In this safe work instrument—

  1. clauses 6 to 9 specify requirements relating to design and construction of a tank for the purposes of regulation 17.6(1)(k) of the Regulations:
  2. clause 10 specifies requirements for the marking of a tank for the purposes of regulation 17.76(1)(b)(ii) of the Regulations:
  3. clause 11 sets out additional requirements that apply to the installation of a tank and states which PCBUs are required to comply with those additional requirements for the purposes of regulation 17.105 of the Regulations:
  4. clause 12 sets out additional requirements that apply to the operation of a tank and states which PCBUs are required to comply with those additional requirements for the purposes of regulation 17.105 of the Regulations:
  5. clause 13 specifies the maximum period of validity for which a compliance certificate for a tank may be issued for the purposes of regulation 17.92(1)(a)(i)(E) of the Regulations.

Thermoplastic stationary tanks (PDF 67 KB)